The picture below shows the same font demonstration as above, but with the inverse feature turned on. Below is an image captured from a logic analyser while the initialisation code runs. Here are some comparisons.

Uploader: Tagor
Date Added: 10 September 2008
File Size: 53.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 17682
Price: Free* [*Free Regsitration Required]

Some are essential to make our site work; others st7565t us improve the user experience. Using advanced features So far all of the features are common to all standard graphic LCDs.

Zt7565r rotation and mirroring In the same way that the screen can be inverted without affecting the display data it is possible to flip the screen in either the horizontal or vertical direction.

This feature could be used with a light sensor to dim the screen st75665r on ambient conditions. Inverting the screen With a single command the ST can be instructed to invert the display. The most important thing needed when developing a library is a good datasheet.

It is not possible to read from the screen therefore it is necessary to keep a copy of the current screen data in memory on the microcontroller.

Home Publications Posts Projects Contact. To calculate the bit inside this byte we must remember that the 8th most significant bit appears at the bottom of the page. Now the is connected to the Arduino we can connect the LCD up. When power is first applied to the screen it is also important to clear the onboard screen st75665r. If the circuit only has a single supply such as 3.

To calculate which byte we need to use we need st75655r divide the Y position by 8 and multiple the result by After this a quick trick is to write a single byte and see how it is displayed.

Remember that it must be at least 25ns long in order to be acceptable. The following image is the basic test card I used to demonstrate that my display was wired up correctly. Finally the LCD power and data lines.

Please, log in or register. It would be trivial to change for another compiler or chip.

1.4"128x64 Serial Graphic LCD Display Module ST7565R White on Blue

Basic operation hardware The most basic pinout for the ST is shown below. Full details are provided on page 31 to 34 of the datasheet above. The is a chip that will convert the high voltage of 5V down to 3V, here is st7565e diagram. It is also possible to measure and see how long the pulse lasts on real hardware.

Be sure to have some sort of resistor! Now that we can send a single command to we need to follow a number of steps to setup the screen. Below is an image captured from a logic analyser while the initialisation code runs.

We will, at our option, either a repair the product using new or refurbished parts, or b replace the product with a new or refurbished product. We s7565r interested in Tscyc, Tshw and Tslw. The ST is capable of setting all points on the display to black without affecting the screen RAM. Therefore we need the remainder after the Y position is divided by 8, which can be found using the modulo operator.

"x64 Serial Graphic LCD Display Module,STr,White on Blue

A quick check is to send constant bytes of 0xFF to fill the screen. This means that the screen can be used either way up with no changes required to the software except sending extra two commands to the screen.

Unless you want to view the screen in a mirror it is necessary to use both commands at once! The illustration below shows the output if the byte 0x80 xt7565r sent four times to the screen: All our lcd display modules have their own datasheets which can be downloaded from their respective product page.

I'll use rainbow wires to make it a bit easier to tell apart but you can use whatever you'd like.

1 thoughts on “St7565r

Leave a Reply

Your email address will not be published. Required fields are marked *